Ready-Mixed Putty R
  • White or insignificantly tinted
  • Environmentally clean and safe
Composition
Calcium carbonate, fine fillers, modifying additives.
Recommended use
The putty is used for internal finishing to level non-deformable gypsum, concrete, lime, cement-lime and cement-sand surfaces (walls and ceilings) in dry premises prior to painting.
Surface preparation
  • Prior to application, remove unsteady sections from the base.
  • Remove dirt, dust, oil, paint, etc. from the surface.
  • The unsteady sections and highly absorbing surfaces should be first treated with acrylic concentrate. It is recommended to treat the surface with “SHEN” acrylic concentrate.
  • The surface should be cured for at least 4 hours, thereafter, the putty is applied.
Application
  • Apply the mixture with a stainless metallic putty trowel on the surface.
  • The works should be done at the temperature no less than +10°C degrees.
  • To obtain smooth surface, polish the surface after drying of the putty.
  • When the work is over or suspended, carefully wash the tools.
  • Dispose of the containers and mixture leftovers as prescribed by local legislation.
  • For fast putty drying expose to air and moderate ventilation.

 

Temperature of the base when applying

from +10°C to +30°C

Recommended thickness of layer

0,1 - 1,5mm

Time of serviceability of the mixture

12 hours

Shrinkage

not more than 0,8mm/m

 

More precisely, the consumption depends on the surface quality and thickness of plaster layer.

3.5 l/25m²

10l/70m²

17l/120m²


Sizes available

3.5l, 10l and 17l plastic containers.

Storage
Store in undamaged packaging at temperatures under 40°C, for 12 months after the manufacturing date indicated on the package.
Terms of use
  • Store in a place inaccessible to children.
  • Avoid contact with skin.
  • In case of contact with eyes, rinse with clean water and, if needed, apply to doctor. 
Attention
  • When working in conditions other than normal, the performances may deviate from the ones indicated in the table.
  • The manufacturer bears no responsibility for working in violation of instructions.