Tile Grout
  • Eco friendly and safe
  • Humidity resistant
Composition
Portland cement, limestone powder, polymer and cellulose additives.
Recommended use
Portland cement, limestone powder, polymer and cellulose additives.
Surface preparation
  • Pour 270-300ml of water per kg of dry mixture into a clean container.
  • Gradually add dry mixture and stir to obtain paste-like mass without lumps.
  • Mix the ready mixture after 5 minutes once more and it is ready for use.
Application
  • Grouting works should be carried out 1-2 days after the installation of the tiles.
  • The joints should be clean, free of dust or dirt.
  • It is recommended to moisture the joints  before grouting works.
  • The works should be done at air temperature from +5°C to 30°C.
  • Apply the grout with a rubber spatula diagonally across the joints until they are completely and totally filled.
  • After 2 hours scour the joints with moisturized (not wet) sponge.
  • It is recommended to moisturize the scoured joints during the first 3 days for the better results.
  • Dispose of the cartoon boxes and mixture leftovers as prescribed by local legislation.

 

Temperature of the base when applying

from +5°C to +30°C

Amount of water per 1 kg of dry mixture

270-300ml

Time of serviceability of the mixture

1 hour

Sizes available
Cartoon boxes. Net weight 1kg.
Storage
Store in dry place for 12 months after the manufacturing date indicated on the package.
Terms of use
  • Store in a place inaccessible to children.
  • When working, protect respiratory organs.
  • Avoid contact with skin.
  • In case of contact with eyes, rinse with clean water and, if needed, apply to doctor.
Attention
  • Do not use detergents while washing and cleaning the joints during 20 days after the work as the mixture contains cement.
  • It is prohibited to add water into the mixture after its tightening.
  • The manufacturer bears no responsibility for working in violation of instructions.