- Outstanding adhesion
Acrylic copolimer, polymer additives, inorganic fillers.
Designed for treatment of smooth concrete surfaces, for creating an adhesive layer between the concrete and refill layers: mortar, grout, stucco.
The base surface must be smooth, solid, dry, clean, moisture and oil
- Stir before use.
- Water can be added about 10% of the total beton-contact mass.
- Apply with a roller or sprayer (with diameter of 1.5 mm) on the
solid, weak surface to create an adhesive layer.
- Apply at air temperature not
lower than +5°C .
- Wash the instruments in water when painting is
- Dispose of the plastic containers as prescribed by local legislation.
Temperature of the base when
from +5°С to +30°С
More precisely, the consumption
depends on the smoothness of the surface.
Final paint drying at an ambient
temperature +20ºC degree, humidity– 65%
5, 10, 15liter plastic containers.
Keep closed, at temperature from +5°C to +40°C. Shelf life 6 months.