- Gray
- Mineral
- Eco
friendly and safe
- Weather resistant
Composition
Quartz sand, “Portland” cement, polyvinyl acetate adhesive, extra cellulose additives.
Recommended use
Designed for interior and exterior finish works (ceramic tiles, natural and artificial stones, plaster, gypsum cardboard, as well as consolidation of substances having firm area).
Surface preparation
- Prior to application clean the surface and remove
dirt, dust, oil, paint, etc. from the surface.
- Before the beginning of the works (except gypsum
cardboard) the surface should be slightly moistened.
- It is
recommended to treat the surface with “SHEN” beton contact.
- Begin the
work after 4-5 hours.
Making the mixture
- Pour 6 -7l of water per 25kg of dry mixture into
a clean container.
- Gradually add dry mixture and stir with a mixer
to obtain paste-like mass without lumps.
- Mix the ready mixture after 10 minutes once more
and it is ready for use.
Application
- Apply
the mixture with a special notched trowel.
- Putty
coating thickness not less than 3mm.
- The works should be done at the temperature no less than +10°C degrees.
- Wash
the instruments in water when the work is over.
- Dispose
of the paper bags and mixture leftovers as prescribed by local legislation.
Temperature of the base
when applying
|
from +10°C to +30°C
|
Amount of water per 1kg
of dry mixture
|
240-280ml
|
Amount of water per 25 kg
of dry mixture
|
6-7l
|
Recommended thickness of
layer
|
3mm or more
|
Time of serviceability of
the mixture
|
3 hours
|
Dry mixture consumption per
3mm thick layer
More precisely, the consumption
depends on the surface quality and thickness of putty layer.
|
25kg /5m²
|
1kg/0,2m²
|
Sizes available
Paper and polypropylene bags. Net weight 25kg.
Storage
Store in undamaged packaging, on palettes, in dry premises, at temperatures under 45°С and humidity under 75%, for 6 months after the manufacturing date indicated on the package.
Terms of use
- Store
in a place inaccessible to children.
- When
working, protect respiratory organs.
- Avoid
contact with skin
- In
case of contact with eyes, rinse with clean water and, if needed, apply to
doctor.
Attention
- It
is prohibited to add water into the mixture after its tightening: this can
cause decreased mixture adhesion and cracking.
- When
working in conditions other than normal, the performances may deviate from the
ones indicated in the table.
- The
manufacturer bears no responsibility for working in violation of instructions.