Calculator:

P1 Putty Whiting
  • White or insignificantly tinted
  • Mineral
  • Environmentally clean and safe
Composition
Calcium carbonate, chalk, fine fillers, modifying additives, redispersion powder.
Recommended use
The putty is used for internal finishing to level non-deformable gypsum, concrete, lime, cement-lime and cement-sand surfaces (walls and ceilings) in dry premises prior to painting.
Surface preparation
  • Prior to application, remove unsteady sections from the base, widen cracks.
  • Remove dirt, dust, oil, paint, etc. from the surface.
  • The unsteady sections and highly absorbing surfaces should be first treated with acrylic concentrate. It is recommended to treat the surface with “SHEN” acrylic concentrate.
  • The surface should be cured for at least 4 hours, thereafter, the putty is applied.

Making the mixture

  • Pour 500 – 520ml of water per 1kg of dry mixture into a clean container.
  • Gradually add dry mixture and stir with a mixer to obtain paste-like mass without lumps.
  • Cure the mixture for 5 minutes and mix again, and then the putty is ready for use.

Application
  • Apply the mixture with a stainless metallic putty trowel on the surface.
  • The works should be done at the temperature no less than +10°C degrees.
  • To obtain smooth surface, polish the surface after drying of the putty.
  • When the work is over or suspended, carefully wash the tools.
  • Dispose of the paper bags and mixture leftovers as prescribed by local legislation.
  • For fast putty drying expose to air and moderate ventilation.

 

Temperature of the base when applying

from +10 °C to +30°C

Amount of water per 1kg of dry mixture

500– 550ml

Amount of water per 10kg of dry mixture

5-5,5l

Amount of water per 30kg of dry mixture

15-15,6l

Recommended thickness of layer

0,1 - 1,5mm

Time of serviceability of the mixture

12 hours

Shrinkage

not more than 0,8mm/m

 

Dry mixture consumption per 1 cm thick layer

More precisely, the consumption depends on the surface quality and thickness of plaster layer.

0.5kg/1m²

10kg/20m²

30kg/60m²

 


Sizes available
Paper and polypropylene bags. Net weight 10 and 30 kg.
Storage
Store in undamaged packaging, on palettes, in dry premises, at temperatures under 40°С and humidity under 75%, for 12 months after the manufacturing date indicated on the package.
Terms of use
  • Store in a place inaccessible to children.
  • When working, protect respiratory organs (chalk can cause allergy).
  • Avoid contact with skin.
  • In case of contact with eyes, rinse with clean water and, if needed, apply to doctor.
Attention
  • It is prohibited to add water into the mixture after its tightening: this can cause decreased mixture adhesion and cracking.
  • When working in conditions other than normal, the performances may deviate from the ones indicated in the table.
  • The manufacturer bears no responsibility for working in violation of instructions.