- Mineral
- Thermal insulated
- Sound insulated
- Eco friendly
and safe
Composition
Gypsum, polymer additives.
Recommended use
Designed for interior works, can be applied on natural stone (tuff), concrete, cement-sand, bricks, concrete blocks and drywall surfaces.
Surface preparation
- Prior to application remove dirt, dust, oil, paint, etc. from the surface .
- It is recommended to treat the surface with “SHEN” beton contact before the works.
- The plaster
can be applied after 4-5 hours.
Making the
mixture
- Pour 18.2-19.6l of water per 35kg of dry mixture into a clean container .
- Gradually add dry mixture and stir with a mixer to obtain
paste-like mass without lumps.
Application
- Apply the mixture with a stainless metallic putty knife or spatula on the surface.
- It is recommended to work at air temperatures not lower than +10°C and relative humidity of not more than 75%.
- When the work
is over or suspended, carefully wash the tools.
- Dispose of the paper bags and mixture leftovers as
prescribed by local legislation.
- For fast plaster drying expose to air
and moderate ventilation.
Temperature of the base when
applying
|
from +10°C to +30°C
|
Amount of water per 1kg of dry
mixture
|
520-560ml
|
Amount of water per 35kg of dry
mixture
|
18.2-19.6l
|
Recommended thickness of layer
|
not less than 1cm
|
Time of serviceability of the mixture
|
not less than 30 minutes
|
Shrinkage
|
not more than 0.8mm/m
|
Dry mixture consumption per 1cm
thick layer More
precisely, the consumption depends on the surface quality and thickness of
plaster layer.
|
11kg/1m²
|
35kg/3.18m²
|
Sizes available
Polypropylene
bags. Net weight 35 kg.
Storage
Store in undamaged packaging, on palettes, in dry premises, at temperatures under 45°С and humidity under 75%, for 3 months after the manufacturing date indicated on the package.
Terms of use
- Store in a
place inaccessible to children.
- When working, protect
respiratory organs.
- Avoid contact
with skin.
- In case of eye
contact, rinse with clean water and, if needed, apply to doctor.
Attention
- It is
prohibited to add water into the mixture after its tightening (beginning of
setting): this can cause decreased mixture adhesion and cracking.
- When working in
conditions other than normal, the performances may deviate from the ones
indicated in the table.
- The
manufacturer bears no responsibility for working in violation of instructions.