Calculator:

Anticorrosive Paint (Gray)
  • Gray
  • High coverage capacity
  • Abrasion and shock resistant
  • UV and weather resistant
Composition
Pentaphtal alkyd resins, anticorrosive fillers, pigments, white spirit.
Recommended use
Designed for metallic surfaces painting and corrosion prevention. Used to protect steel, cast iron and other ferrous metal surfaces, including slightly rusted surfaces. The paint ensures durable and reliable protection of metal constructions, conduits against corrosion.
Surface preparation

The painted surface must be clean, dry and dust, oil, paint free. 

Application
  • Mix thoroughly before using.
  • Use for dilution white-spirit or other benzene solvents.
  • Apply the paint with brush, roller or sprayer.
  • The painting should be done at the temperature no less than +5°C degrees.
  • At an ambient temperature +20°C degrees, humidity – 65 %, second coating should be executed approximately after 4-6  hours.
  • When the work is over or suspended carefully wash the tools with solvent.
  • Dispose of the metallic containers as prescribed by local legislation.

 

Temperature of the base when applying

from +5°С to +30°С

Paint consumption per one layer

More precisely, paint consumption depends on the smoothness of the coverable surface.

1l / 8-10m²

3,785l / 30-40m²

20l / 180-200m²

 

Final paint drying at an ambient temperature +20°C degree, humidity - 65%

 

24 hours

 

Sizes available
3,785liter and 20liter metallic containers.
Storage
Keep closed, at temperature no less than +5°C for 12 months after the manufacturing date indicated on the container.
Terms of use
  • Keep away from fire.
  • Keep away from sunlight.
  • Store in a place inaccessible to children.
  • When painting big surfaces, protect respiratory organs wearing a protective mask.
  • Avoid contact with skin.
  • In case of contact with eyes, apply to doctor.
Attention
  • When working in conditions other than normal, the performances may deviate from the ones indicated above.
  • If the metallic surface has previously been saturated with oil, painting works can be done only after removing the oil layer from the surface.
  • The manufacturer bears no responsibility for working in violation of instructions.