Calculator:

Alkyd Enamel (White glossy)
  • White glossy
  • High coverage capacity
  • Abrasion and shock resistant
  • UV and weather resistant
Composition
Pentaphtal alkyd resins, pigments, white spirit, siccatives and fillers.
Recommended use
Intended for metallic, interior and exterior construction surfaces: concrete, cement, brick, plaster, gypsum, wood, plywood, wood particle board, fiber board.
Surface preparation

The painted surface must be clean, dry and dust, oil free.

Application
  • Mix thoroughly before using.  
  • Use for dilution white-spirit or other benzene solvents.  
  • Apply the paint with brush, roller or sprayer.  
  • The painting should be done at the temperature no less than +5°C degrees. 
  • At an ambient temperature +20°C degrees, humidity – 65%, second coating should be executed approximately after 4-6 hours.  
  • When the work is over or suspended carefully wash the tools with solvent. 
  • Dispose of the metallic containers as prescribed by local legislation. 

 

Temperature of the base when applying

from +5°С to +30°С 

Paint consumption per one layer

More precisely, paint consumption depends on the smoothness of the coverable surface.

1l / 8-9m²

3,785l /30-34m²

20l / 160-180m²

 

Final paint drying at an ambient temperature +20°C degree, humidity– 65%

 

36 hours
Sizes available
0.375 liters, 3,785 liters and 20 liters metallic containers.
Storage
Keep closed, at temperature no less than + 50C for 12 months after the manufacturing date indicated on the container.
Terms of use
  • Keep away from fire.
  • Keep away from sunlight.
  • Store in a place inaccessible to children.
  • When painting big surfaces, protect respiratory organs wearing a protective mask.
  • Avoid contact with skin.
  • In case of contact with eyes, apply to doctor.
Attention
  • When working in conditions other than normal, the performances may deviate from the ones indicated above.
  • The manufacturer bears no responsibility for working in violation of instructions.